Useful Information
Please click here
to view our Useful Information. These notes are intended as a guide to the processor,
particularly the vacuum former, as good practice for the proper storage, forming and handling of the
material and similar products. If you have specific questions that are not
covered here or in the general notes, please do not hesitate to contact us.
Availability & Lead Times
Availability
Patterned foils are Acrylic based and are 610mm wide (a few are 915mm).
Stock Substrates – Black ABS 1.5mm, 2.0mm, 2.5mm, 3.0mm & 4.5mm Sheet sizes
NOTE; Stock substrates can be cut down to create alternative sizes eg 610 x 610mm can be cut into two pieces 610 x 305mm etc.
Other custom sizes and materials are also usually available, but not considered ‘stock’. If you require a size not shown, please ask.
Lead Times
Stock foils laminated to stock substrates 5-7 days ex-works (US)
Stock foils laminated to custom substrates (see below) 3-4 weeks ex-works (US)
Custom substrates
These are either alternative size sheets that cannot be cut from those above, or alternative materials, for example TPOs, Polyester, coloured or natural ABS, acrylics etc.
These are usually subject to MOQs. For more information, please
contact us.
